As always, BSDCan 2017 was another great conference. I recommend BSDCan to anyone I speak to as one of the best BSD conferences to attend in this part of the world. I gave my talk on the State of Network Security Monitoring (NSM) tools on the BSD operating systems. The talk was well received, but I will be updating my slides when I give this talk again at vBSDCon with updated information and allow time for more questions. In addition to being a speaker at the conference, Daemon Security once again is a "Silver Sponsor" of vBSDCon and I am looking forward to the conference venue that will be in the Reston Town Center, at the Hyatt Regency Hotel. Registration is now available from the conference website:
I look forward to seeing everyone there.
Author: Michael Shirk
A few weeks ago, a user on the Bro IDS mailing list was looking for a way to run Bro in a FreeBSD jail. FreeBSD jails provide the foundation of operating system-level virtualization, later utilized and enhanced by Solaris zones, and those containers that everyone thinks are something new. To avoid going on a complete rant, I recommend the following write-up as an overview of FreeBSD jails:
The purpose of this howto is to document that basic steps necessary to use Bro within a FreeBSD jail. For jail management, ezjail is normally the recommended way to setup jails. With a recent copy of FreeBSD (FreeBSD 11), run the following commands to install the ezjail package and setup your Bro jail (Note: vtnet0 is my network interface on the host, which could also be em0, or re0 in your case):
# pkg install -y ezjail The settings for rc.conf are recommended for jails, but they can be adjusted as needed, since Bro can be configured to send out email alerts. Now with the jail running, the Bro package can be installed within the jail using pkg with the following command:
# ezjail-admin install -p
# ezjail-admin create bro 'vtnet0|192.168.1.20'
# cat << EOF > /usr/jail/bro/etc/rc.conf
cron_flags="$cron_flags -J 15"
# echo 'nameserver 192.168.1.1' > /usr/jails/bro/etc/resolv.conf
# sysrc ezjail_enable=yes
# ezjail-admin start bro
# pkg -j bro install -y broBefore Bro can be used, the jail configuration needs to be updated to allow the bro jail access to bpf, the berkley packet filter used for reading packets from a network device. By design, the jail does not allow access to listen on a network interface. Modifying the devfs rules loaded by the jail will allow for reading of packets from the interface used to create the jail (which matches the host interface). Run the following commands to create a special devfs rule that will allow the jail access to bpf device:
# cat << EOF >> /etc/devfs.confThe jail is now setup to work with Bro, and the necessary Bro configuration updates can be made. The following commands are the bare minimum to get Bro running, please see the Bro documentation for additional configuration settings (Note: replace vtnet0 with the same interface used to create the jail):
add include $devfsrules_hide_all
add include $devfsrules_unhide_basic
add include $devfsrules_unhide_login
add include $devfsrules_unhide_bpf
# sed -i '' -e 's/devfsrules_jail/7/' /usr/local/etc/ezjail/bro
# sed -i '' -e 's/^127.0.0.1.*/127.0.0.1 bro localhost/' /usr/jails/bro/etc/hostsNow after restarting the jail, you can start Bro using the 'broctl' script:
# sed -i '' -e 's/^interface=.*/interface=vtnet0/' /usr/jails/bro/usr/local/etc/node.cfg
# sed -i '' -e 's/^host=.*/host=192.168.1.20/' /usr/jails/bro/usr/local/etc/node.cfg
# ezjail-admin restart broBro will now be running within the jail, and from the host you can analyze the logs in /usr/jails/bro/usr/local/spool/bro.
# jexec bro /usr/local/bin/broctl deploy
There are additional configurations that can be made to this Bro jail, including the usage of a non-root user for Bro. With this configuration, if there was a vulnerability within Bro that could be exploited, the attacker could only break out into the jail file tree structure. Another caveat is that the jail is setup to start when the FreeBSD host starts, but in order to make Bro start automatically, you can add the following to rc.local within the jail
echo '/usr/local/bin/broctl deploy' >> /usr/jails/bro/etc/rc.local
Author: Michael Shirk